Back to all devices

Tuya SPM01V1-GT in Home Assistant

Energy · Zigbee · Smart energy monitor for 1P+N system

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Tuya
Model: SPM01V1-GT
Device type: Energy
Radio: Zigbee
Power: Mains powered
Reports itself as: _TZE204_d2zfgtij, _TZE284_d2zfgtij, _TZE200_d2zfgtij
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested A pull request seeks to add support for a power sensor (TS0601) by Tuya, which is not yet recognized by ZHA, allowing Home Assistant to monitor electrical power usage. since September 20, 2026 · zha-device-handlers #5360

Changes proposed for ZHA

pull request A pull request proposes adding support for a Tuya single-phase energy meter, which is not currently usable with ZHA. This would let ZHA track electricity usage data from the meter. since October 17, 2026 · zha-device-handlers #5466

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Device status Total energy Energy phase A Energy phase B Energy phase C Total power Total current Energy produced Total power factor Update frequency +4

Source: zha-device-handlers · pull request #5466 · by @pawelmoll · October 17, 2026
Signature: _TZE284_d2zfgtij / TS0601

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Legrand 412015 Energy · Zigbee · DIN power consumption module Zigbee2MQTT Review
Develco EMIZB-132 Energy · Zigbee · Wattle AMS HAN power-meter sensor Zigbee2MQTT ZHA quirk 1 open report Review
BTicino F20T60A Energy · Zigbee · DIN power consumption module Zigbee2MQTT Review
Datek HSE2905E Energy · Zigbee · Datek Eva AMS HAN power-meter sensor Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.