Tuya MG-AU03GPOZLP-XX in Home Assistant
Energy · Zigbee · Double GPO power point with USB-C and energy monitoring (also sold as Smartlink Automation 'Glass smart double power point with USB-C')
Zigbee2MQTT has a definition for this device. ZHA has no quirk for it – many devices work in ZHA without one, but features outside the Zigbee standard may be missing.
Facts about this device
- Brand
- Tuya
- Model
- MG-AU03GPOZLP-XX
- Device type
- Energy
- Radio
- Zigbee
- Power
- Mains powered
- Reports itself as
- _TZE284_lq0ffndf
- Also sold as
- EyZEE 0403-MG-GPO04ZSLP
- Zigbee2MQTT
- Device page on zigbee2mqtt.io
How the device gets into Home Assistant
- official ZHA – with a Zigbee coordinator and the ZHA integration. A device that follows the Zigbee standard works without a quirk; how completely this model does is not confirmed.
- official Tuya Zigbee gateway – paired with a Tuya Zigbee gateway and controlled through the Tuya cloud with the Tuya integration.
- add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT.
Known problems and fixes
Requests for ZHA support
- support requested A Tuya device resembling a thermostat is not supported in ZHA. Adding support would allow Home Assistant to interact with its temperature control features.
ZHA quirks for this device
There is no quirk for this device – neither in ZHA nor proposed or shared as a custom quirk.
Alternatives
The same job from other makers – devices of the same type and radio that work with Home Assistant too.
-
Legrand 412015 Energy · Zigbee · DIN power consumption module Zigbee2MQTT Review
- Develco EMIZB-132 Energy · Zigbee · Wattle AMS HAN power-meter sensor Zigbee2MQTT ZHA quirk 1 open report Review
- BTicino F20T60A Energy · Zigbee · DIN power consumption module Zigbee2MQTT Review
- Datek HSE2905E Energy · Zigbee · Datek Eva AMS HAN power-meter sensor Zigbee2MQTT Review
Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.