Back to all devices

SONOFF S60ZBTPF in Home Assistant

Smart plugs · Zigbee · Zigbee smart plug

Zigbee2MQTT Quirk included in ZHA 1 open report

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
SONOFF
Model
S60ZBTPF
Device type
Smart plugs
Radio
Zigbee
Power
Mains powered
Reports itself as
S60ZBTPF
Zigbee2MQTT
Device page on zigbee2mqtt.io

Where to buy

Loading product data …

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

  • open The SONOFF S60ZBTPF device does not report voltage when turned off, making it impossible to monitor power usage accurately in this state. since March 25, 2026 · zha-device-handlers #4866

Changes proposed for ZHA

  • pull request A proposed addition to support the Shelly Gen4 relay input as a binary sensor, allowing Home Assistant to monitor its state. since October 7, 2026 · zha-device-handlers #5417
  • pull request The Sonoff S60ZBTPF device lacks protection, LED, and energy monitoring details in Home Assistant. The proposed change would add these entities for better control. since August 29, 2026 · zha-device-handlers #5289
  • pull request The Sonoff S60ZBTPF smart plug does not have configurable overload protection settings in ZHA. This pull request would add options to adjust these settings via Home Assistant. since June 8, 2026 · zha-device-handlers #5068
  • pull request Sonoff S60ZBTPF and S60ZBTPG devices lack overload protection settings. The proposed change would expose these settings for better safety control. since May 19, 2025 · zha-device-handlers #4075

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Network LED

Source: zha-device-handlers · since zha-quirks 2.2.2
Signature: SONOFF / S60ZBTPF

4 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top