Back to all devices

SEDEA eTH730 in Home Assistant

Climate sensors · Zigbee · Temperature and humidity sensor

Zigbee2MQTT Quirk proposed, not merged yet 3 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: SEDEA
Model: eTH730
Device type: Climate sensors
Radio: Zigbee
Power: Battery
Reports itself as: _TZ3000_lqmvrwa2
Same device as: Tuya TS0201
Also sold as: BlitzWolf BW-IS4, Danfoss 014G2480, Moes ZSS-S01-TH, Nedis ZBSC10WT, Tuya HS09, Tuya TH09Z, Tuya TS0201_1, Tuya TS0201_2, Tuya ZTH01/ZTH02, Tuya ZTH05_1, Tuya ZY-ZTH02
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

open A temperature–humidity sensor (A60_ZTH03_Pro) stops updating after hours. Fixing this would ensure continuous data reporting. since January 14, 2026 · zha-device-handlers #4654

Requests for ZHA support

support requested A request for support for the TS0201 device. Without support, Home Assistant cannot interact with it, but adding it would enable integration and functionality. since December 15, 2025 · zha-device-handlers #4575
support requested The TS0201 temperature/humidity sensor is not recognized by ZHA, so it cannot send data. Support would enable Home Assistant to use the sensor for monitoring environmental conditions. since November 4, 2025 · zha-device-handlers #4465

Changes proposed for ZHA

pull request A proposed change would add support for a temperature and humidity sensor with an IP rating, but this is not yet implemented in ZHA. since November 26, 2025 · zha-device-handlers #4527
pull request A proposed change adds a custom device class for the Tuya TY0201 sensor, enabling Home Assistant to correctly interpret and display sensor data. since September 7, 2025 · zha-device-handlers #4319

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #4527 · by @tomuk5 · November 26, 2025 · 3 approvals
Signature: _TZ3000_isw9u95y / TS0201

2 more quirks for this device

Quirk proposed, not merged yet _TZ3000_yupc0pb7 / TS0201 zha-device-handlers · pull request #4527 · by @tomuk5 · November 26, 2025 · 3 approvals
Custom quirk shared in an issue _TZ3000_yupc0pb7 / TS0201 zha-device-handlers · issue #4575 · by @soosp · January 5, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Nedis ZBSC10WT Climate sensors · Zigbee, Wi-Fi · Temperature and humidity sensor Zigbee2MQTT Tuya Local (HACS) Custom quirk needed Review
Nous E6 Climate sensors · Zigbee · Temperature & humidity LCD sensor Zigbee2MQTT ZHA quirk 2 open reports Review
SONOFF SNZB-02 Climate sensors · Zigbee · Temperature and humidity sensor Zigbee2MQTT 1 open report Review
Tuya IH-K009 Climate sensors · Zigbee · Temperature & humidity sensor Zigbee2MQTT ZHA quirk 1 open report Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.