Back to all devices

QA QAFZ200 in Home Assistant

Lights & bulbs · Zigbee · CCT light controller

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: QA
Model: QAFZ200
Device type: Lights & bulbs
Radio: Zigbee
Reports itself as: _TZ3218_op6ztaju
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested A Tuya device lacks support for 'Do Not Disturb' and 'Power Restore Memory' features in ZHA. Adding these features would let users customize behavior after power outages and during disturbances. since September 7, 2025 · zha-device-handlers #4328
support requested A Tuya dimmer switch is not supported, so it cannot be used with Home Assistant. Adding support would enable control of the dimmer's brightness and on/off states via Home Assistant. since August 28, 2025 · zha-device-handlers #4295

Changes proposed for ZHA

pull request A RGB+CCT light is misidentified as CCT-only in ZHA, preventing full color control. The proposed change would fix this misidentification to enable proper RGB+CCT functionality. since May 15, 2026 · zha-device-handlers #5005

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #5005 · by @hculap · May 15, 2026
Signature: _TZB210_nfzrlz29 / TS0502B

1 more quirk for this device

Custom quirk shared in an issue _TZ3210_ehcanwyc / TS0502B zha-device-handlers · issue #4328 · by @V4n1X · September 7, 2025

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Gledopto GL-LB-001P Lights & bulbs · Zigbee · Zigbee USB LED bar RGB+CCT (pro) Zigbee2MQTT 1 open report Review
Innr RS 232 C Lights & bulbs · Zigbee · GU10 spot, dimmable, RGBW Zigbee2MQTT 1 open report Review
Airam 4713407 Lights & bulbs · Zigbee · LED OP A60 ZB 9W/827 E27 Zigbee2MQTT Review
Dresden Elektronik FLS-A Lights & bulbs · Zigbee · Zigbee controller for 1-10V/PWM Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.