Back to all devices

Onesti Products AS NimlyCodePRO in Home Assistant

Relays & modules · Zigbee · Zigbee module for Nimly Code PRO

Zigbee2MQTT Quirk proposed, not merged yet

Zigbee device – see the note above on what ZHA needs for it.

Brand: Onesti Products AS
Model: NimlyCodePRO
Device type: Relays & modules
Radio: Zigbee
Power: Battery
Reports itself as: NimlyCodePRO
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Last action source Last action Last action user Last PIN code Autorelock Sound volume

Source: zha-device-handlers · pull request #5345 · by @vinnyspb · September 16, 2026
Signature: Onesti Products AS / NimlyCodePRO

1 more quirk for this device

Quirk proposed, not merged yet Onesti Products AS / NimlyCodePRO zha-device-handlers · pull request #4881 · by @fredrik-lindseth · March 30, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

BTicino FC80CC Relays & modules · Zigbee · DIN contactor module Zigbee2MQTT Review
Paulmann 500.43 Relays & modules · Zigbee · SmartHome controller (Relay) Zigbee2MQTT Review
Tuya TS011F_din_smart_relay Relays & modules · Zigbee · Din smart relay (with power monitoring) Zigbee2MQTT Review
Vimar 03981 Relays & modules · Zigbee · IoT connected relay module Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Facts about this device

How the device gets into Home Assistant

ZHA quirks for this device

Alternatives