Back to all devices

Novato ZPV-01 in Home Assistant

Water · Zigbee · Battery powered smart valve

Zigbee2MQTT Quirk proposed, not merged yet 3 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Novato
Model: ZPV-01
Device type: Water
Radio: Zigbee
Power: Battery
Reports itself as: _TZE204_dsagrkvg, _TZE284_zm8zpwas, _TZE284_sdvbnmj5
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Open problems

open The Tuya smart valve controller (PF-PM070D TYZ) is not supported. A request is made to add control for the valve through Home Assistant. since January 20, 2026 · zha-device-handlers #4672

Requests for ZHA support

support requested A ball valve actuator from DOOYA is not recognized by Home Assistant, so it cannot be controlled or monitored. Adding support would allow users to integrate and manage the valve through Home Assistant. since August 28, 2025 · zha-device-handlers #4297
support requested A battery-powered valve controller for water and gas is not supported. Adding support would allow it to be controlled via ZHA. since May 19, 2025 · zha-device-handlers #4074

Changes proposed for ZHA

pull request The Novato ZPV-01 smart valve is not supported in ZHA. Adding its quirk would allow Home Assistant to adjust valve positions for irrigation or HVAC systems. since June 4, 2026 · zha-device-handlers #5058
pull request A Tuya TS0601 water valve (Novato ZPV-01) is not supported. Adding support would let ZHA control water flow via the valve. since August 29, 2025 · zha-device-handlers #4300

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Weather delay Time left Timer state Last valve open duration Timer duration Frost lock Frost lock reset Irrigation cycles Irrigation mode Irrigation duration +34

Source: zha-device-handlers · pull request #5058 · by @bilgi-source · June 4, 2026
Signature: _TZE204_dsagrkvg / TS0601

4 more quirks for this device

Quirk proposed, not merged yet _TZE284_zm8zpwas / TS0601 zha-device-handlers · pull request #5058 · by @bilgi-source · June 4, 2026
Quirk proposed, not merged yet _TZE284_sdvbnmj5 / TS0601 zha-device-handlers · pull request #5058 · by @bilgi-source · June 4, 2026
Quirk proposed, not merged yet _TZE284_zm8zpwas / TS0601 zha-device-handlers · pull request #4300 · by @tiranhay · August 29, 2025
Custom quirk shared in an issue _TZE284_zm8zpwas / TS0601 zha-device-handlers · issue #4074 · by @fokcuk · May 19, 2025 · 3 approvals

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Aqara SJCGQ12LM Water · Zigbee · Water leak sensor T1 Zigbee2MQTT ZHA quirk Review · from 21.96 €
MultIR MIR-WA100 Water · Zigbee · Water leakage sensor Zigbee2MQTT Review
Salus Controls WLS600 Water · Zigbee · Water leakage sensor Zigbee2MQTT Review
SONOFF SNZB-05P Water · Zigbee · Zigbee water sensor Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.