Back to all devices

Moes ZTRV-S01 in Home Assistant

Water · Zigbee · Zigbee temperature control valve

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Moes
Model: ZTRV-S01
Device type: Water
Radio: Zigbee
Power: Battery
Reports itself as: _TZE200_ivdc0kwl
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The MOES ZRTV-S01-WH-MS is not supported in ZHA, and the request includes a proposed implementation to enable its functionality. since January 29, 2026 · zha-device-handlers #4696

Changes proposed for ZHA

pull request A Moes thermostat is not yet supported. The proposed change would add support to read and control temperature settings via ZHA. since September 24, 2026 · zha-device-handlers #5374
pull request A proposed change would add support for the Moes ZTRV-S01 thermostat, allowing temperature control via Home Assistant. since January 30, 2026 · zha-device-handlers #4704

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Open window detection Frost protection Local temperature calibration Child lock Valve position Battery low Away mode Schedule enable Scale protection Window open +21

Source: zha-device-handlers · pull request #4704 · by @malko · January 30, 2026
Signature: _TZE200_ivdc0kwl / TS0601

3 more quirks for this device

Quirk proposed, not merged yet _TZE200_ivdc0kwl / TS0601 zha-device-handlers · pull request #5374 · by @sdbldn · September 24, 2026
Custom quirk shared in an issue _TZE200_ivdc0kwl / TS0601 zha-device-handlers · issue #4696 · by @malko · January 30, 2026
Custom quirk shared in an issue _TZE200_ivdc0kwl / TS0601 zha-device-handlers · issue #4696 · by @malko · January 29, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Aqara SJCGQ12LM Water · Zigbee · Water leak sensor T1 Zigbee2MQTT ZHA quirk Review · from 21.96 €
MultIR MIR-WA100 Water · Zigbee · Water leakage sensor Zigbee2MQTT Review
Salus Controls WLS600 Water · Zigbee · Water leakage sensor Zigbee2MQTT Review
SONOFF SNZB-05P Water · Zigbee · Zigbee water sensor Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.