Back to all devices

Moes ZHT-S03 in Home Assistant

Thermostats & TRV · Zigbee · Zigbee wall thermostat

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Moes
Model: ZHT-S03
Device type: Thermostats & TRV
Radio: Zigbee
Reports itself as: _TZE204_zxkwaztm
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The Moes ZHT-S03 Wall Thermostat is not recognized by ZHA, making it impossible to adjust temperature settings. Adding support would allow it to be managed through Home Assistant. since October 13, 2025 · zha-device-handlers #4397

Changes proposed for ZHA

pull request A pull request proposes adding support for the Tuya Wall Thermostat TS0601, enabling temperature control via Home Assistant. since January 7, 2026 · zha-device-handlers #4626

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Preset mode Local temperature calibration Child lock Floor temperature Sensor mode Open window detection Thermostat mode Regulator period Regulator set point Current +11

Source: zha-device-handlers · pull request #4626 · by @cordenr · January 7, 2026 · 4 approvals
Signature: _TZE204_zxkwaztm / TS0601

2 more quirks for this device

Custom quirk shared in an issue _TZE204_zxkwaztm / TS0601 zha-device-handlers · issue #4397 · by @Jibbarth · November 8, 2025 · 3 approvals
Custom quirk shared in an issue _TZE204_zxkwaztm / TS0601 zha-device-handlers · issue #4397 · by @ptiguig · October 13, 2025 · 5 approvals

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Aqara SRTS-A01 Thermostats & TRV · Zigbee · Smart radiator thermostat E1 Zigbee2MQTT ZHA quirk 1 open report Review · from 180.48 €
Zen Zen-01-W Thermostats & TRV · Zigbee · Thermostat Zigbee2MQTT ZHA quirk 1 open report Review
Alecto SMART-HEAT10 Thermostats & TRV · Zigbee · Radiator valve with thermostat Zigbee2MQTT ZHA quirk Review · from 91.06 €
Brennenstuhl HT CZ 01 Thermostats & TRV · Zigbee · Radiator thermostat Zigbee2MQTT ZHA quirk Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.