Mercator Ikuü SSW06G in Home Assistant
Wall switches · Zigbee · 6 Gang switch
This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.
Facts about this device
- Brand
- Mercator Ikuü
- Model
- SSW06G
- Device type
- Wall switches
- Radio
- Zigbee
- Power
- Mains powered
- Reports itself as
- _TZE200_wnp4d4va
- Same device as
- Tuya TS0601_switch_6_gang
- Also sold as
- Ekaza EKAT-T3074-6WZ, Ekaza EKGD-T4085P-4Z, Nova Digital FZB-6, Nova Digital NTZB-04-W-B, Nova Digital SA-6
- Zigbee2MQTT
- Device page on zigbee2mqtt.io
How the device gets into Home Assistant
- official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA.
- add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT.
Known problems and fixes
Open problems
- open Tuya TS0601 EF00 devices may stop responding to commands if not regularly checked. The proposed change would enable periodic check-ins to keep the device active.
- open The NovaDigital 4-gang switch is not supported by ZHA, so its buttons cannot be used in Home Assistant. Adding support would allow control of multiple circuits via the switch.
ZHA quirks for this device
Quirk included in ZHA Recommended quirk
Part of ZHA – Home Assistant uses it on its own, nothing to install.
Source:
zha-device-handlers · since zha-quirks 2.2.2
Signature: _TZE200_wnp4d4va / TS0601
8 more quirks for this device
-
Quirk included in ZHA
_TZE200_emxxanvi/TS0601zha-device-handlers · since zha-quirks 2.2.2 -
Quirk proposed, not merged yet
_TZE200_wnp4d4va/TS0601zha-device-handlers · pull request #5529 · by @surajvelip · October 25, 2026 -
Quirk proposed, not merged yet
_TZE200_emxxanvi/TS0601zha-device-handlers · pull request #5529 · by @surajvelip · October 25, 2026 -
Quirk proposed, not merged yet
_TZE200_wnp4d4va/TS0601zha-device-handlers · pull request #5320 · by @cydia2020 · September 11, 2026 -
Quirk proposed, not merged yet
_TZE200_emxxanvi/TS0601zha-device-handlers · pull request #5320 · by @cydia2020 · September 11, 2026 -
Quirk proposed, not merged yet
_TZE200_wnp4d4va/TS0601zha-device-handlers · pull request #5015 · by @MahdiBM · May 19, 2026 -
Quirk proposed, not merged yet
_TZE200_emxxanvi/TS0601zha-device-handlers · pull request #5015 · by @MahdiBM · May 19, 2026 -
Custom quirk shared in an issue
_TZE204_wskr3up8/TS0601zha-device-handlers · issue #4474 · by @rodrigolinkweb · November 8, 2025
Alternatives
The same job from other makers – devices of the same type and radio that work with Home Assistant too.
-
Tuya TS0001_switch_module Wall switches · Zigbee · 1 gang switch module Zigbee2MQTT Custom quirk needed 3 open reports Review
-
Aqara SSM-U01 Wall switches · Zigbee · Single switch module T1 (with neutral) Zigbee2MQTT ZHA quirk 2 open reports Review
-
SONOFF ZBMINIR2
Wall switches · Zigbee · Zigbee smart switch
Zigbee2MQTT
ZHA quirk
2 open reports
Review
-
AduroSmart 81849
Wall switches · Zigbee · ERIA Built-in Dimmer
Zigbee2MQTT
Review
Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.
