Back to all devices

Loginovo ZG-101Z in Home Assistant

Smoke & safety · Zigbee · SOS button

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Loginovo
Model: ZG-101Z
Device type: Smoke & safety
Radio: Zigbee
Power: Battery
Reports itself as: ZG-101Z, _TZE200_nojsjtj2, _TZE200_vrcfo4i0
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The TS0601 device (specific model) is not supported by ZHA. Adding support would allow Home Assistant to use it as intended. since May 28, 2024 · zha-device-handlers #3178

Changes proposed for ZHA

pull request A Tuya SOS Button is not supported in ZHA. The proposed change would allow Home Assistant to detect and use this button's functionality. since May 26, 2026 · zha-device-handlers #5034

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Source: zha-device-handlers · pull request #5034 · by @burgonet · May 26, 2026
Signature: _TZE200_vrcfo4i0 / TS0601

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Moes ZSS-HM-SSD01 Smoke & safety · Zigbee · Smoke sensor Zigbee2MQTT ZHA quirk 1 open report Review
Tuya TS0216 Smoke & safety · Zigbee · Sound and flash siren Zigbee2MQTT Review
Develco SMSZB-120 Smoke & safety · Zigbee · Smoke detector with siren Zigbee2MQTT ZHA quirk 2 open reports Review
Alecto SMART-SMOKE10 Smoke & safety · Zigbee · Smoke detector Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.