Back to all devices

Gledopto GL-SPI-206P in Home Assistant

Lights & bulbs · Zigbee · SPI pixel controller RGBCCT/RGBW/RGB

Zigbee2MQTT Quirk proposed, not merged yet 3 open reports

Zigbee device – see the note above on what ZHA needs for it.

Brand: Gledopto
Model: GL-SPI-206P
Device type: Lights & bulbs
Radio: Zigbee
Reports itself as: _TZE204_8fffc3kb, _TZE284_gt5al3bl, _TZE28C1000000_gt5al3bl
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The _TZE284_gt5al3bl (Gledopto GL-SPI-206P) is not supported in ZHA, so it cannot be integrated with Home Assistant. since December 30, 2025 · zha-device-handlers #4610
support requested The Zigbee RGBW LED strip controller is not supported, preventing color and brightness control. Support would enable Home Assistant to manage the strip's settings via the controller. since March 21, 2025 · zha-device-handlers #3972
support requested A Skydance WZ-SPI RGBW LED strip controller is not supported in ZHA. Adding support would allow Home Assistant to control the LED strip's color and brightness. since October 18, 2024 · zha-device-handlers #3442

Changes proposed for ZHA

pull request A Gledopto RGB light does not support color control. Adding support would allow adjusting the light's color in Home Assistant. since June 17, 2026 · zha-device-handlers #5095
pull request A proposed change would add support for a Tuya TS0601 SPI LED controller, allowing it to be controlled through Home Assistant with proper functionality. since April 3, 2026 · zha-device-handlers #4901

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Work mode Countdown Pixel count LED color order Chip type Do not disturb Scene Music mode Music sensitivity

Source: zha-device-handlers · pull request #5095 · by @strepto42 · June 17, 2026
Signature: _TZE284_gt5al3bl / TS0601

5 more quirks for this device

Quirk proposed, not merged yet _TZE204_8fffc3kb / TS0601 zha-device-handlers · pull request #5095 · by @strepto42 · June 17, 2026
Quirk proposed, not merged yet _TZE204_8fffc3kb / TS0601 zha-device-handlers · pull request #4901 · by @Rudis1261 · April 3, 2026
Custom quirk shared in an issue _TZE284_gt5al3bl / TS0601 zha-device-handlers · issue #4610 · by @basilfx · December 30, 2025
Custom quirk shared in an issue _TZE204_8fffc3kb / TS0601 zha-device-handlers · issue #3972 · by @nikakoy131 · April 25, 2025
Custom quirk shared in an issue _TZE204_8fffc3kb / TS0601 zha-device-handlers · issue #3972 · by @THK-artjom · March 21, 2025 · 6 approvals

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Innr RS 232 C Lights & bulbs · Zigbee · GU10 spot, dimmable, RGBW Zigbee2MQTT 1 open report Review
Airam 4713407 Lights & bulbs · Zigbee · LED OP A60 ZB 9W/827 E27 Zigbee2MQTT Review
Dresden Elektronik FLS-A Lights & bulbs · Zigbee · Zigbee controller for 1-10V/PWM Zigbee2MQTT Review
Aqara LGYCDD01LM Lights & bulbs · Zigbee · LED Strip T1 Zigbee2MQTT ZHA quirk 2 open reports Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.