Danfoss Icon2 in Home Assistant
Thermostats & TRV · Zigbee · Icon2 Main Controller, Room Thermostat or Sensor
Zigbee device – see the note above on what ZHA needs for it.
Facts about this device
- Brand
- Danfoss
- Model
- Icon2
- Device type
- Thermostats & TRV
- Radio
- Zigbee
- Power
- Battery
- Reports itself as
- Danfoss
- Zigbee2MQTT
- Device page on zigbee2mqtt.io
How the device gets into Home Assistant
- official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above.
- add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT.
Known problems and fixes
Changes proposed for ZHA
- pull request A quirk is proposed to allow the Danfoss Icon2 main controller to work with Home Assistant, enabling proper integration and control features that are not supported today.
- pull request The Danfoss Icon2 thermostat is not supported in ZHA. Adding a quirk would allow Home Assistant to read and set temperature values.
ZHA quirks for this device
Quirk proposed, not merged yet Recommended quirk
Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.
Adds: Room status Floor sensor mode Schedule Pre-heat Pump running System status Water flow mode Controller role Forced heating/cooling mode
Source:
zha-device-handlers · pull request #4976 · by @ps-nl · May 6, 2026
Signature: Danfoss / 0x0210
Alternatives
The same job from other makers – devices of the same type and radio that work with Home Assistant too.
-
Aqara SRTS-A01 Thermostats & TRV · Zigbee · Smart radiator thermostat E1 Zigbee2MQTT ZHA quirk 1 open report Review · from 180.48 €
-
Zen Zen-01-W Thermostats & TRV · Zigbee · Thermostat Zigbee2MQTT ZHA quirk 1 open report Review
-
Alecto SMART-HEAT10
Thermostats & TRV · Zigbee · Radiator valve with thermostat
Zigbee2MQTT
ZHA quirk
Review · from 98.13 €
-
Brennenstuhl HT CZ 01 Thermostats & TRV · Zigbee · Radiator thermostat Zigbee2MQTT ZHA quirk Review
Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.
