Back to all devices

AVATTO ZWT100 in Home Assistant

Thermostats & TRV · Zigbee · Zigbee Thermostat

Zigbee2MQTT Quirk included in ZHA 1 open report

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
AVATTO
Model
ZWT100
Radio
Zigbee
Reports itself as
_TZE204_aaeaifez, _TZE284_aaeaifez, _TZE28C1000000_aaeaifez

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

  • support requested The Avatto ZWT100-WH-3A power meter receives data but does not send updates to ZHA, making its state invisible in Home Assistant. Fixing this would enable the device to report its energy measurements and status properly. since October 15, 2026 · zha-device-handlers #5459

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Preset mode Local temperature calibration Child lock Floor temperature Sensor mode Open window detection Thermostat mode Regulator period Regulator set point Current +11

Source: zha-device-handlers · since zha-quirks 2.4.0
Signature: _TZE284_aaeaifez / TS0601

1 more quirk for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top