Back to all devices

Arteco ZS-300Z in Home Assistant

Climate sensors · Zigbee · Soil moisture sensor

Zigbee2MQTT Quirk included in ZHA

This device is known to both Zigbee integrations: Zigbee2MQTT has a definition for it, and ZHA has a quirk that adapts it.

Facts about this device

Brand
Arteco
Model
ZS-300Z
Device type
Climate sensors
Radio
Zigbee
Reports itself as
ZS-304Z, _TZE284_k7p2q5d9, _TZE284_65gzcss7, _TZE284_0ints6wl, _TZE284_yzr43ayq, _TZE2841000000_0ints6wl
Also sold as
Arteco ZS-302Z
Zigbee2MQTT
Device page on zigbee2mqtt.io

How the device gets into Home Assistant

  • official ZHA – with a Zigbee coordinator and the ZHA integration; the quirk the device needs is part of ZHA. Integration
  • add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Changes proposed for ZHA

  • pull request A soil sensor from Tuya is not supported in ZHA, making it impossible to read soil data. The proposed change would add support to allow Home Assistant to use the sensor's measurements. since May 15, 2026 · zha-device-handlers #5004
  • pull request A Tuya soil sensor variant is not yet supported in ZHA. This pull request would allow Home Assistant to read soil moisture data from the sensor. since May 10, 2026 · zha-device-handlers #4987
  • pull request The Arteco ZS-301Z soil moisture sensor is not supported in ZHA. Adding support would allow Home Assistant to read soil moisture levels from the sensor. since December 28, 2025 · zha-device-handlers #4602
  • pull request The Arteco ZS-304Z soil moisture sensor is not supported in ZHA. Adding support would enable Home Assistant to read soil moisture data from the sensor. since December 25, 2025 · zha-device-handlers #4599

ZHA quirks for this device

Quirk included in ZHA Recommended quirk

Part of ZHA – Home Assistant uses it on its own, nothing to install.

Adds: Temperature report interval Humidity report interval Display unit Temperature alarm Alarm temperature max Alarm temperature min Temperature sensitivity Humidity alarm Alarm humidity max Alarm humidity min +9

Source: zha-device-handlers · since zha-quirks 2.4.0
Signature: _TZE284_0ints6wl / TS0601

12 more quirks for this device

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.

Scroll to Top