Back to all devices

Aqara WS-K05E in Home Assistant

Wall switches · Zigbee · Dimmer Switch H2 US

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Aqara
Model: WS-K05E
Device type: Wall switches
Radio: Zigbee
Reports itself as: lumi.switch.agl007
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The Aqara H2 Dimmer Switch (US) is not yet compatible with ZHA. Support would allow Home Assistant to control lights via the switch. since May 8, 2026 · zha-device-handlers #4983

Changes proposed for ZHA

pull request The Aqara Dimmer Switch H2 US is not recognized by ZHA. Adding a quirk would allow Home Assistant to control its dimming functionality properly. since August 27, 2026 · zha-device-handlers #5284

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Operation mode (paddle) Operation mode (up button) Operation mode (down button) Mode switch Phase Power on state Minimum brightness Maximum brightness LED indicator Flip indicator light

Source: zha-device-handlers · pull request #5284 · by @e11o · August 27, 2026
Signature: Aqara / lumi.switch.agl007

1 more quirk for this device

Custom quirk shared in an issue Aqara / lumi.switch.agl007 zha-device-handlers · issue #4983 · by @explosivo2k2 · May 8, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

SONOFF ZBMINIR2 Wall switches · Zigbee · Zigbee smart switch Zigbee2MQTT ZHA quirk 3 open reports Review · from 17.03 €
Tuya TS0001_switch_module Wall switches · Zigbee · 1 gang switch module Zigbee2MQTT Custom quirk needed 3 open reports Review
AduroSmart 81849 Wall switches · Zigbee · ERIA Built-in Dimmer Zigbee2MQTT Review
BTicino 3584C Wall switches · Zigbee · Connected lighting micromodule Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.