Back to all devices

Aqara WP-P01D in Home Assistant

Smart plugs · Zigbee · Smart wall outlet H2 EU

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Aqara
Model: WP-P01D
Device type: Smart plugs
Radio: Zigbee
Reports itself as: lumi.plug.aeu001
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The Aqara Wall Outlet H2 EU is not supported by ZHA. Adding support would enable Home Assistant to interact with its functions like power monitoring. since June 3, 2024 · zha-device-handlers #3187

Changes proposed for ZHA

pull request A proposed change to support the Aqara Wall Outlet H2 EU, enabling Home Assistant users to control it remotely. since December 29, 2024 · zha-device-handlers #3653

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Child lock Power on behavior Overload protection LED indicator Charging protection Charging limit

Source: zha-device-handlers · pull request #3653 · by @andreibsk · December 29, 2024 · 5 approvals
Signature: Aqara / lumi.plug.aeu001

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

AduroSmart 81848 Smart plugs · Zigbee · ERIA Power Measuring Plug (EU) Zigbee2MQTT Review
Bosch BSP-FZ2 Smart plugs · Zigbee · Smart plug compact (type F plug) Zigbee2MQTT Review
Busch-Jaeger 6717-84 Smart plugs · Zigbee · Adaptor plug Zigbee2MQTT Review
Tuya TS011F_plug_1 Smart plugs · Zigbee · Smart plug (with power monitoring) Zigbee2MQTT Custom quirk needed 2 open reports Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.