Back to all devices

Aqara DS-K02D/DS-K02E in Home Assistant

Covers & blinds · Zigbee · Aqara Shutter Switch H2 EU

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: Aqara
Model: DS-K02D/DS-K02E
Device type: Covers & blinds
Radio: Zigbee
Power: Mains powered
Reports itself as: lumi.switch.aeu003
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The Aqara Shutter Switch H2EU is not supported by ZHA, meaning its buttons and shutter control functionality are unavailable in Home Assistant. Support would enable full control of the shutter via the switch. since October 17, 2025 · zha-device-handlers #4410

Changes proposed for ZHA

pull request The Aqara H2 Shutter switch is not recognized by ZHA. This change would enable Home Assistant to control window coverings using the switch. since June 6, 2026 · zha-device-handlers #5060
pull request An Aqara Shutter Switch H2 EU would be supported, enabling control of window coverings. It is not recognized now, so its buttons cannot be used. since February 18, 2026 · zha-device-handlers #4769

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Force open cover Force close cover Force stop cover Multi-click button 3 Multi-click button 4 Position raw

Source: zha-device-handlers · pull request #4769 · by @totoroot · February 18, 2026
Signature: Aqara / lumi.switch.aeu003

2 more quirks for this device

Quirk proposed, not merged yet Aqara / lumi.switch.aeu003 zha-device-handlers · pull request #5060 · by @panagiks · June 6, 2026
Custom quirk shared in an issue Aqara / lumi.switch.aeu003 zha-device-handlers · issue #4410 · by @fkloft · January 13, 2026

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

Moes MS-108ZR Covers & blinds · Zigbee · Zigbee + RF curtain switch module Zigbee2MQTT 2 open reports Review
NodOn SIN-4-RS-20 Covers & blinds · Zigbee · Roller shutter relay switch Zigbee2MQTT ZHA quirk 1 open report Review
Legrand 067776 Covers & blinds · Zigbee · Netatmo wired shutter switch Zigbee2MQTT Review
LoraTap SC500ZB Covers & blinds · Zigbee · Smart curtain/shutter switch Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.