Back to all devices

Aqara DJT12LM in Home Assistant

Door & window · Zigbee · Vibration sensor T1

Zigbee2MQTT Quirk proposed, not merged yet 2 open reports

Zigbee device – see the note above on what ZHA needs for it.

We have a detailed page on this device with compatibility ratings and prices. Details and compatibility

Brand: Aqara
Model: DJT12LM
Device type: Door & window
Radio: Zigbee
Reports itself as: lumi.vibration.agl01
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
official Aqara hub – paired with an Aqara hub that works as a Matter bridge (such as the M3 or M2), which shares supported devices with Home Assistant. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested The Aqara Vibration Sensor T1 (lumi.vibration.agl01) is not supported in Home Assistant. Adding support would allow detection of vibrations. since March 8, 2026 · zha-device-handlers #4816
support requested The Aqara Vibration Sensor is not fully supported. Adding support would allow Home Assistant to detect motion and tilt accurately. since June 19, 2025 · zha-device-handlers #4137

Changes proposed for ZHA

pull request The Aqara DJT12LM device is not supported in ZHA. Adding support would allow Home Assistant to use its functionality for home automation. since May 5, 2026 · zha-device-handlers #4972

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Vibration reset timeout Sensitivity adjustment

Source: zha-device-handlers · pull request #4972 · by @cnotin · May 5, 2026 · 1 approval
Signature: LUMI / lumi.vibration.agl01

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →

Alternatives

The same job from other makers – devices of the same type and radio that work with Home Assistant too.

SONOFF SNZB-04 Door & window · Zigbee · Contact sensor Zigbee2MQTT ZHA quirk 1 open report Review · from 16.40 €
Third Reality 3RVS01031Z Door & window · Zigbee · Zigbee vibration sensor Zigbee2MQTT ZHA quirk 1 open report Review · from 19.99 €
Immax 07045L Door & window · Zigbee · Magnetic contact sensor Zigbee2MQTT Review
Nous E3 Door & window · Zigbee · Door sensor Zigbee2MQTT Review

Sources: Zigbee2MQTT, ZHA quirks, Z-Wave JS, the Matter certification database, Shelly, ESPHome, Tasmota, Tuya Local and the issue trackers on GitHub. Reports are assigned to a device by the identifiers they contain; the sentences come from the integration pages, where a language model writes them from the titles.