Back to all devices

AOYAN AY02SZ in Home Assistant

Door & window · Zigbee · Vibration sensor

Zigbee2MQTT Quirk proposed, not merged yet 1 open report

Zigbee device – see the note above on what ZHA needs for it.

Brand: AOYAN
Model: AY02SZ
Device type: Door & window
Radio: Zigbee
Power: Battery
Reports itself as: AOYAN
Same device as: HOBEIAN ZG-102ZM
Zigbee2MQTT: Device page on zigbee2mqtt.io

How the device gets into Home Assistant

official ZHA – with a Zigbee coordinator and the ZHA integration; for all its functions it needs a custom quirk, see above. Integration
add-on Zigbee2MQTT – Zigbee2MQTT runs as an add-on and passes the device on to Home Assistant over MQTT. Integration · Source

Known problems and fixes

Requests for ZHA support

support requested Someone asked ZHA to support this device or one of its functions. since September 7, 2025 · zha-device-handlers #4317

Changes proposed for ZHA

pull request A change to ZHA for this device has been proposed and is waiting for review. since March 28, 2026 · zha-device-handlers #4872

ZHA quirks for this device

Quirk proposed, not merged yet Recommended quirk

Proposed to ZHA and waiting for review – the maintainers check it before it becomes part of Home Assistant.

Adds: Vibration Contact Sensitivity level

Source: zha-device-handlers · pull request #4872 · by @Idskov · March 28, 2026 · 2 approvals
Signature: HOBEIAN / ZG-102ZM

7 more quirks for this device

Quirk proposed, not merged yet _TZE200_wzk0x7fq / TS0601 zha-device-handlers · pull request #4941 · by @delneet · April 22, 2026
Quirk proposed, not merged yet _TZE200_jfw0a4aa / TS0601 zha-device-handlers · pull request #4941 · by @delneet · April 22, 2026
Quirk proposed, not merged yet _TZE200_wzk0x7fq / TS0601 zha-device-handlers · pull request #4872 · by @Idskov · March 28, 2026 · 2 approvals
Quirk proposed, not merged yet _TZE200_jfw0a4aa / TS0601 zha-device-handlers · pull request #4872 · by @Idskov · March 28, 2026 · 2 approvals
Custom quirk shared in an issue HOBEIAN / ZG-102ZM zha-device-handlers · issue #4317 · by @sascha-wojewsky-IPD · March 27, 2026 · 1 approval
Custom quirk shared in an issue HOBEIAN / ZG-102ZM zha-device-handlers · issue #4317 · by @shieldwed · December 18, 2025
Custom quirk shared in an issue HOBEIAN / ZG-102ZM zha-device-handlers · issue #4317 · by @igrowing · October 27, 2025

The quirk is not part of ZHA yet. You can use it as a custom quirk until it is:

Tell ZHA where custom quirks are kept – in configuration.yaml:
```
zha:
  custom_quirks_path: /config/custom_zha_quirks/
```
Create that folder and save the quirk as a .py file in it.
Restart Home Assistant. If the device was paired before, reconfigure it or remove and pair it again so the quirk is applied.
Check it worked: the device page shows the quirk under Zigbee info.

A custom quirk has not been reviewed by the ZHA maintainers. Delete the file once the quirk is part of a Home Assistant release – otherwise the old copy takes precedence.

All quirks in the ZHA quirk database →