Back to the overview
Vogel’s MotionMount in Home Assistant
motionmount
part of Home Assistant since 2024.1
Local, push
Set up in the user interface
Quality: Bronze
Vogel’s MotionMount is an official Home Assistant integration for Binary sensor, Number, Select and Sensor. Talks to the device on your own network and is told about every change straight away.
Facts about this integration
- Compatible with Home Assistant
- yes, official integration
- Connection
- Local, push – Talks to the device on your own network and is told about every change straight away.
- Setup
- in the user interface
- Kind
- Single device
- Quality scale
- Bronze – The basic requirements for a new integration are met.
- Installations
- 3
- Categories
- Binary sensor, Number, Select, Sensor
- Provides
- Binary sensor, Number, Select, Sensor
- Found automatically via
- Network discovery (Zeroconf)
- Maintained by
- @laiho-vogels
- Python packages
python-MotionMount==2.3.0
Setup
- Home Assistant can find this integration on its own: if it is suggested under Settings → Devices & services, confirm it there.
- In Home Assistant open Settings → Devices & services.
- Click "Add integration" and search for Vogel’s MotionMount.
- Follow the dialog – it asks for everything the integration needs.
The link goes through my.home-assistant.io and opens the setup dialog in your own instance – no address of ours is involved.
Source of this entry: the official documentation of the integration