Back to the overview
SEKO PoolDose in Home Assistant
pooldose
part of Home Assistant since 2025.9
Local, polling
Set up in the user interface
Quality: Platinum
SEKO PoolDose is an official Home Assistant integration for Binary sensor, Number, Select, Sensor, Switch and Water management. Talks to the device on your own network and asks for changes at regular intervals.
Facts about this integration
- Compatible with Home Assistant
- yes, official integration
- Connection
- Local, polling – Talks to the device on your own network and asks for changes at regular intervals.
- Setup
- in the user interface
- Kind
- Single device
- Quality scale
- Platinum – The highest level: fully typed, efficient and maintained to every rule of the project.
- Installations
- 33
- Categories
- Binary sensor, Number, Select, Sensor, Switch, Water management
- Provides
- Binary sensor, Diagnostics, Number, Select, Sensor, Switch
- Found automatically via
- Network discovery (DHCP)
- Maintained by
- @lmaertin
- Python packages
python-pooldose==0.9.10
Setup
- Home Assistant can find this integration on its own: if it is suggested under Settings → Devices & services, confirm it there.
- In Home Assistant open Settings → Devices & services.
- Click "Add integration" and search for SEKO PoolDose.
- Follow the dialog – it asks for everything the integration needs.
The link goes through my.home-assistant.io and opens the setup dialog in your own instance – no address of ours is involved.
Source of this entry: the official documentation of the integration