Back to the overview
DROP in Home Assistant
drop_connect
part of Home Assistant since 2024.1
Local, push
Set up in the user interface
DROP is an official Home Assistant integration for Binary sensor, Select, Sensor and Switch. Talks to the device on your own network and is told about every change straight away.
Facts about this integration
- Compatible with Home Assistant
- yes, official integration
- Connection
- Local, push – Talks to the device on your own network and is told about every change straight away.
- Setup
- in the user interface
- Kind
- Hub – several devices through one gateway or account
- Installations
- 31
- Categories
- Binary sensor, Select, Sensor, Switch
- Provides
- Binary sensor, Select, Sensor, Switch
- Found automatically via
- MQTT
- Maintained by
- @ChandlerSystems, @pfrazer
- Python packages
dropmqttapi==1.0.3
Setup
- Home Assistant can find this integration on its own: if it is suggested under Settings → Devices & services, confirm it there.
- In Home Assistant open Settings → Devices & services.
- Click "Add integration" and search for DROP.
- Follow the dialog – it asks for everything the integration needs.
The link goes through my.home-assistant.io and opens the setup dialog in your own instance – no address of ours is involved.
Source of this entry: the official documentation of the integration