Zigbee2MQTT Edge
Zigbee2MQTT Edge is a development build of the Zigbee2MQTT app that enables communication with Zigbee devices via MQTT. Users use it to control and monitor smart home devices in a Zigbee network.
Facts about this add-on
- Security rating
- 7 / 8
- Ingress
- yes
- Maintenance
- rare – once or twice a year (2 changes/year)
- Version
edge- Last change
- February 17, 2026
- Repository
- zigbee2mqtt/hassio-zigbee2mqtt
- Project
- github.com
- Architectures
- aarch64, amd64
- Ports
- 8485/tcp -> 8485
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Reached through Ingress, so no port of its own | +2 |
| Result | 7 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/zigbee2mqtt/hassio-zigbee2mqtt through the three-dot menu.
- Reload the store and open Zigbee2MQTT Edge.
- Install the add-on and wait for the first start.
- Switch on "Show in sidebar" – the interface then opens directly inside Home Assistant.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.
Home Assistant integration
- MQTT – The add-on uses this integration