Network UPS Tools
hassio-addons/repository
0.18.1
Network UPS Tools manages battery backup devices to monitor and control power status. Users use it to detect power outages and trigger shutdowns automatically.
Facts about this add-on
- Security rating
- 6 / 8
- Ingress
- no
- Maintenance
- regular – a few times a year (5 changes/year)
- Version
0.18.1- Last change
- August 20, 2026
- Repository
- hassio-addons/repository
- Project
- github.com
- Architectures
- aarch64, amd64
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Opens no port to the outside | +2 |
| May command the Supervisor (role: manager) | -1 |
| Result | 6 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
What the add-on is allowed to do
- Supervisor role: manager
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/hassio-addons/repository through the three-dot menu.
- Reload the store and open Network UPS Tools.
- Install the add-on and wait for the first start.
- Check the rights the add-on asks for before you start it – they are listed above.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.
Home Assistant integration
- Network UPS Tools (NUT) – The integration for the same product