NetAlertX Full Access
alexbelgium/hassio-addons
26.9.0
NetAlertX Full Access provides centralized network visibility and continuously discovers devices and assets. It helps users monitor and manage network infrastructure by tracking changes and identifying unknown devices.
Facts about this add-on
- Security rating
- 1 / 8
- Ingress
- yes
- Maintenance
- very lively – several changes a month (76 changes/year)
- Version
26.9.0- Last change
- September 11, 2026
- Repository
- alexbelgium/hassio-addons
- Project
- github.com
- Architectures
- aarch64, amd64
- Ports
- 20211/tcp -> 20211, 20212/tcp -> 20212
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Reached through Ingress, so no port of its own | +2 |
| Asks for far reaching rights (NET_ADMIN, NET_RAW) | -1 |
| Shares the network of the host | -1 |
| Has full hardware access – that alone sets the rating to 1 | – |
| Result | 1 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
What the add-on is allowed to do
- Full hardware access
- Uses the host network
- Extended rights: NET_ADMIN, NET_RAW
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/alexbelgium/hassio-addons through the three-dot menu.
- Reload the store and open NetAlertX Full Access.
- Install the add-on and wait for the first start.
- Switch on "Show in sidebar" – the interface then opens directly inside Home Assistant.
- Check the rights the add-on asks for before you start it – they are listed above.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.
Home Assistant integration
- MQTT – The add-on uses this integration