MQTT Explorer
hassio-addons/repository
0.1.0
MQTT Explorer allows users to browse and monitor MQTT topics and messages. People use it to troubleshoot and manage MQTT communications in their Home Assistant setup.
Facts about this add-on
- Security rating
- 7 / 8
- Ingress
- yes
- Maintenance
- unknown
- Version
0.1.0- Repository
- hassio-addons/repository
- Project
- github.com
- Architectures
- aarch64, amd64
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Reached through Ingress, so no port of its own | +2 |
| Result | 7 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/hassio-addons/repository through the three-dot menu.
- Reload the store and open MQTT Explorer.
- Install the add-on and wait for the first start.
- Switch on "Show in sidebar" – the interface then opens directly inside Home Assistant.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.
Home Assistant integration
- MQTT – The add-on uses this integration