HassOS SSH port 22222 Configurator
This add-on configures SSH access for the Home Assistant OS console on port 22222.
Facts about this add-on
- Security rating
- 1 / 8
- Ingress
- yes
- Maintenance
- rare – once or twice a year (2 changes/year)
- Version
0.9.3- Last change
- May 4, 2026
- Repository
- adamoutler/HassOSConfigurator
- Project
- community.home-assistant.io
- Architectures
- amd64, i386, armhf, armv7, aarch64
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Ships its own AppArmor profile | +1 |
| Reached through Ingress, so no port of its own | +2 |
| Asks for far reaching rights (SYS_ADMIN) | -1 |
| Has full hardware access – that alone sets the rating to 1 | – |
| Result | 1 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
What the add-on is allowed to do
- Full hardware access
- Extended rights: SYS_ADMIN
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/adamoutler/HassOSConfigurator through the three-dot menu.
- Reload the store and open HassOS SSH port 22222 Configurator.
- Install the add-on and wait for the first start.
- Switch on "Show in sidebar" – the interface then opens directly inside Home Assistant.
- Check the rights the add-on asks for before you start it – they are listed above.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.