Frigate (Full Access)
Frigate provides real-time object detection using local IP cameras, allowing users to monitor and identify people, pets, and vehicles directly on their home network.
Facts about this add-on
- Security rating
- 1 / 8
- Ingress
- yes
- Maintenance
- regular – a few times a year (9 changes/year)
- Version
0.18.0- Last change
- September 12, 2026
- Repository
- blakeblackshear/frigate-hass-addons
- Project
- github.com
- Architectures
- amd64, aarch64
- Ports
- 8555/tcp -> 8555, 8555/udp -> 8555
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Reached through Ingress, so no port of its own | +2 |
| Asks for far reaching rights (PERFMON) | -1 |
| Has full hardware access – that alone sets the rating to 1 | – |
| Result | 1 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
What the add-on is allowed to do
- Full hardware access
- Extended rights: PERFMON
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/blakeblackshear/frigate-hass-addons through the three-dot menu.
- Reload the store and open Frigate (Full Access).
- Install the add-on and wait for the first start.
- Switch on "Show in sidebar" – the interface then opens directly inside Home Assistant.
- Check the rights the add-on asks for before you start it – they are listed above.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.
Home Assistant integration
- MQTT – The add-on uses this integration
The same software from other repositories
| Repository | Ingress | Security | Changes/year |
|---|---|---|---|
| blakeblackshear/frigate-hass-addons – shown here | yes | 1 | 9 |
| blakeblackshear/frigate-hass-addons – recommended | yes | 7 | 0 |
| blakeblackshear/frigate-hass-addons | yes | 6 | 17 |
| blakeblackshear/frigate-hass-addons | yes | 6 | 9 |
| blakeblackshear/frigate-hass-addons | yes | 6 | 1 |
| blakeblackshear/frigate-hass-addons | yes | 1 | 17 |
Picked by: interface inside Home Assistant first, then the security rating, then how actively the add-on is maintained.