Bluetooth Presence Monitor
Limych/hassio-addons
1.0.0
Tracks when Bluetooth devices are nearby by detecting signals from beacons or phones. Users use it to monitor presence in rooms or areas without active sensors.
Facts about this add-on
- Security rating
- 3 / 8
- Ingress
- no
- Maintenance
- dormant – nothing changed for over a year
- Version
1.0.0- Last change
- February 4, 2020
- Repository
- Limych/hassio-addons
- Project
- github.com
- Architectures
- aarch64, amd64, armhf, armv7, i386
How this rating comes about
Home Assistant calculates the rating itself: every add-on starts at 5, and each right it asks for or gives up moves the number. The same calculation runs here, on the configuration the add-on ships.
| Starting value of every add-on | 5 |
|---|---|
| Asks for far reaching rights (NET_ADMIN) | -1 |
| Shares the network of the host | -1 |
| Result | 3 / 8 |
A high number does not mean the add-on is good, and a low one does not mean it is dangerous – a backup add-on has to reach far into the system to do its job. The number says how much it is allowed to do, and the list above says what exactly.
What the add-on is allowed to do
- Uses the host network
- Extended rights: NET_ADMIN
Installation
- In Home Assistant open Settings → Add-ons → Add-on Store, and add the repository https://github.com/Limych/hassio-addons through the three-dot menu.
- Reload the store and open Bluetooth Presence Monitor.
- Install the add-on and wait for the first start.
- Check the rights the add-on asks for before you start it – they are listed above.
Add repository to my Home Assistant Open the add-on directly
Both links go through my.home-assistant.io and open the store of your own instance – no address of ours is involved.